Product Description
SPC SKIRTING:
| T-MOLDING |
| Size(mm): 2400*45*6 |
| Packing: 20 pc/ctn |
| Weight: 11.4 KGS |
| REDUCER |
| Size(mm): 2400*43*6 |
| Packing: 20 pc/ctn |
| Weight: 12.0 KGS |
| END-CAP |
| Size(mm): 2400*35*6 |
| Packing: 20 pc/ctn |
| Weight: 12.2 KGS |
| QUARTER ROUND |
| Size(mm): 2400*28*16 |
| Packing: 25 pc/ctn |
| Weight: 14 KGS |
| TAIR NOSE |
| Size(mm): 2400*55*18 |
| Packing: 10 pc/ctn |
| Weight: 11 KGS |
| FLUSH STAIR NOSE A |
| Size(mm): 2400*110*24 |
| Packing: 6 pc/ctn |
| Weight: 11.8 KGS |
| SKIRTING 80mm |
| Size(mm): 2400*80*15 |
| Packing: 10 pc/ctn |
| Weight: 18.5 KGS |
| SKIRTING 90mm |
| Size(mm): 2400*90*15 |
| Packing: 10 pc/ctn |
| Weight: 19 KGS |
Detailed Photos
Installation Instructions
- First, clean your floor. Make sure your garage floor is clean, dry and free of debris. Sweep dirt out of your garage and remove any lumps or excess cement/debris that might cause a bump on the surface.
- A dry surface is particularly important as adhesive will not bond to the PVC properly if the floor is damp. If you are concerned about adhesion issues we advise ordering a small sample to test out first.
- Next, unroll your flooring. Position your flooring at the front of your garage, one roll at a time. Roll the flooring out front-to-back and position carefully. Use a push broom to push out any air underneath the roll.
- In cooler months you will need to leave the unrolled flooring out for around 24-48 hours to acclimatize. You can accelerate this by leaving them in a warm room.
- If you notice the edges and corners of the rolls are lifting up when left to acclimatise you can use heavy objects to assist in holding these down at the edges.
- When installing multiple rolls wall-to-wall, you can make one of two joints: and overlap joint or a butt joint.
- For overlap joints, one roll will be placed over another about 19mm to create a virtually seamless floor.
- For butt joints, you will want to fold back the edge of roll #1 and wipe clean. Apply PVC adhesive along the roll #1's edge leaving 2" of adhesive exposed and fold the roll back into position. Next you will want to fold back roll #2 and wipe the bottom edge clean. Carefully align along the edge of roll #1, making sure not to stretch the mat when applying.
- PVC suitable adhesives can be used to bond these to the floor. One option we recommend is by the company 'CT1' and features an adhesive designed for PVC. Other options are acrylic based adhesives for PVC.
- You can leave suitably heavy items on the roll, particularly its corners to assist in holding the edges down whilst the adhesive is curing.
- When cutting material for wall-to-wall installations, make sure to trim edges around exterior walls, poles boards, etc. with a sharp utility knife while leaving a 5mm gap to allow for expansion and contraction of your floor.
- After the product has been allowed to relax in place, hold down the edges or seam between two floor protectors with adhesive for perimeter or full spread adhered floors
Packaging & Shipping
After Sales Service
1,Size Customization
2,Customized Carton And Logo
3,Logo Printing On the Floor
4,Logo Printing On The Floor Mat
5,Upgrade Antibacterial Paint
6,Sample Customization
7,Show Board Customization
8,OEM/ODM
We certainly can print the box as your design with your logo and your company name and all information you supply to us. Also we can help you design the box if you do not have ready made box design, you just tell us your idea.
FAQ
Q:What is your guarantee for SPC floor?
A:SPC floors are durable, unbending, and virtually indestructible. They are made to cater high traffic commercial areas, as well as for home use. They are nonflammable and very safe to use. These were subjected to numerous studies and have undergone testing through the years and have eventually come up with the newest, most safe SPC floorings that we have to date. Our guarantee is 25 years for Home use, 10 years for commercial use.
Q:How can I get your samples?
A:Leave us a message along with your name and email so we can discuss what type of samples would suit your project/home design the best. Our highly trained professionals are willing to cater and share knowledge with our consumers with regard to the best SPC options that they can choose from.
Q:What is the thickness of SPC floor?
A:SPC's flooring in general has a multi layer material; its thickness is ranging from 3.2mm to 9mm. Here are the layers of SPC flooring:
Wear layer: This transparent layer is responsible for its scratch resistant and easy clean feature.
Vinyl layer: This layer provides the decoration; this is where colors and patterns are printed.
SPC layer: This layer is the base of the SPC. It is the dense, waterproof and rigid.
Attached underlayment: This layer is generally made from IXPE or EVA foam, which provides sound insulation and cushioning.
Q:Can you provide the floor accessories?
A:one-stop service is available. Skirting, Reducer, T-molding and so on.
Audited Supplier 
){kind=link}